Equipped with a high-precision dual energy sensor
It is possible to float up only the foreign objects by performing image processing based on the X-ray images of two different energy bands. Due to this mechanism, high-precision inspection of foreign objects can be achieved.
Detection of minute foreign objects achieved with high precision
Minute foreign objects of 0.127mm high and 0.14mm wide can be detected from pharmaceutical raw material powder in a bag. In the test using a sample product, a highly reliable result of 10 successful detections out of 10 times was obtained.
Detection errors reduced by accurate identification of overlapped products
This system accurately identifies overlapped products and is effective to reduce detection errors. In the meat industry such as ham and sausage, it can effectively detect the foreign objects which it was difficult to detect by the conventional systems.
|Dimension of inspection product||W188mm×H100mm||W330mm×H100mm|
|Max. inspectable width (on the belt surface)||188mm||330mm|
|Transport belt speed||15 〜 45m/min *1||15 〜 45m/min *1|
|Detection sensitivity||φ0.2mm iron or stainless ball, stone, glass, hard bone, and high density plastic pieces, etc. (Theoretical value)|
|Display unit||12.1-inch wide TFT color LCD (with touch panel)|
|Structure||Main unit/Base: All-stainless (SUS304)
Waterproof structure with the main unit conforming to IP66 (excluding the cooler)
|Max. X-ray output||Tube voltage (Max.): 75kV, Tube current (Max.): 8.0mA
However, the electric power is limited to 300W.
|Operating environment||Temperature: 0 to 35℃, Humidity: 30 to 85%, No dew condensation allowed. (It is necessary to clean the filter periodically.)|
|Power supply||AC200V±10% 2.8kVA 50/60Hz|
*1 For other transport belt speed, contact System Square Inc.
* Appropriate options may be separately needed in the following cases: Large temperature deviation in the installation location, high humidity, too cold or too hot object to be inspected.