Stable mass inspection achieved with a new X-ray sensor
The relative mass inspection can be made stably even for a lightweight and large number of products such as individually-packaged ones and high-speed transportation which cannot be supported by the auto checker. For example, when inspecting dressing in a small bag, the dispersion observed in the conventional systems is greatly suppressed.
Simultaneous inspection of multiple items available
“Foreign objects” included in the product, “relative mass” and “shape” excluding the package can be inspected simultaneously. In the inspection of the shape, the system contributes to quality improvement by inspecting cracks, chippings, length/width, area, and other items.
|Dimension of inspection product *1||W240mm×H120mm||W390mm×H150mm|
|Transport weight||5kg *1|
|Transport belt speed||15 〜 45m/min *2|
|Belt width||270mm (without improper tracking-less function)
(270mm with improper tracking-less function is optional.)
|420mm (without improper tracking-less function)
(420mm with improper tracking-less function is optional.)
|Detection sensitivity||φ0.3mm iron or stainless ball, stone, glass, hard bone, and high density plastic pieces, etc.|
|Display unit||12.1-inch wide TFT color LCD (with touch panel)|
|Structure||Main unit/Base: All-stainless (SUS304)
Waterproof structure with the main unit conforming to IP66
|Max. X-ray output||Tube voltage (Max.): 50kV, Tube current (Max.): 5.0mA
However, the electric power is limited to 150W.
|Tube voltage (Max.): 75kV, Tube current (Max.): 8.0mA
However, the electric power is limited to 300W.
|Operating environment||Temperature: 0 to 35C, Humidity: 30 to 85%,
No dew condensation allowed.
(It is necessary to clean the filter periodically.)
|Power supply|| AC100V±10% / AC200V±10%
| AC100V±10% / AC200V±10%
*1 Varies depending on the contents of inspection. For details, contact System Square.
*2 If even higher speed is needed, contact System Square.
* Appropriate options may be separately needed in the following cases: Large temperature deviation in the installation location, high humidity, too cold or too hot object to be inspected.
SX2554HW appearance figure
SX4074HW appearance figure