Issue
We were concerned because the existing system's sorting, for defective products, was not working properly. In installing a metal detector for a new expansion line, we wanted to proceed it by checking the operation of the sorting machine if possible.
Solution
From our first inquiry, we received courteous responses. The fact that we were able to test the sorting at the actual plant helped to alleviate any concerns we may have had.
Background:We were concerned about the sorting operation and was not sure which manufacturer to select.
With the existing system, we were troubled by the fact that sorting often did not go well during sorting. Since we did not know how to improve the situation, we were concerned that the same problem would occur with new metal detectors.
Reason of installation:“Prompt response” to meetings and communications. Proposal of a test to eliminate concerns about sorting.
We were grateful for the quick response to our situation, as if they were aware of our concerns. We were able to confirm the operation of the sorting system by conducting a test at our factory, which allowed us to proceed with the introduction of the system with peace of mind.
How it works:High-speed inspection and sorting of metallic foreign objects.
With the existing system, we had to stop the line if the sorting did not go well, and it took time to have the equipment adjusted. With a new metal detector and sorting machine, we are able to flow the inspection items at the requested speed and have reduced line stoppages, which we feel has improved productivity.
*Some cases may contain special options as necessary.
*Contents are subject to change without prior notice.
Posted2024/09/18
Updated2024/09/18
Model:
Small size Metal Detectors SD3P-30Type
Suitable for small size products such as candy, chocolate, cookie, yogurt, sandwiches, etc. that is under 30 cm width. Bulk, packaged, and unpackaged products can be inspected. Metals such as iron, stainless-steel, brass, etc. can be detected.